Nylon 6.0 GF 30 Preto

Chemical Designation: Polyamide 6

DIN Abbreviation: PA 6 GF 30

Colour, Filler: Black

30% glass fibres

Stock Availability: Standard length 3 metres, also cut to size

Rod 4 - 200 mm dia

Plate 5 - 100 mm thick

Tube 20 - 300 mm OD

Profile

Finished parts, machined or injection moulded

    Nylon 6.0 GF 30 preto, is a 30% glass fibre reinforced semicrystalline engineering plastic with high strength, rigidity and weathering resistance.

Main characteristics: very strong very abrasion resistant

very rigid good heat distortion resistance

uv-resistant not electrically insulating

good dimensional accuracy easily machined

resistant to many oils, greases, easily bonded

diesels, petrol, ...

  • Preferred Fields: Mechanical engineering, automotive engineering, transport and conveyor technology, gears, couplings and engine construction, textile, packaging and paper processing machinery, precision engineering, electrical tools, agricultural machines

Applications: diverse machine parts housing parts

levers distance pieces

thermal insulators friction rings

wiper blades support rings

    Nylon 6 GF 30 - Preto

    The following information corresponds with our current knowledge and indicates our products and possible applications. We cannot give a legally binding guarantee of certain properties or the suitability for a specific application. Existing commercial patents must be observed. A definitive quality guarantee is given in our general conditions of sales. Unless otherwise stated, these values represent averages taken from injection moulding samples. We reserve the right of technical alterations.

Properties Unit Test Method DIN ASTM Dry Wet *
Mechanical        
Density g/cm³ 53 479 1.35  
Yield strength MPa 53 455    
Strain at break % 53 455 180 140
Flexural strength MPa 53 452 3 5
Strain at break in flexure % 53 452 8500 6000
Modulus of elasticity in flexure MPa 53 457    
Ball indentation hardness MPa 53 456 220 150
Impact strength
(Charpy)		 kJ/m2 53 453 55 80
Creep rupture strength after
1000 hrs with static load		 MPa      
Time yield for 1%
elongation after 1000 hrs.		 MPa   21 - 35  
Coefficient of friction against
hardened and ground steel
p = 0.05 N/mm², v = 0.6 m/s		 –   0.46 - 0.52  
Wear
conditions as above		 µm/km      
Thermal        
Crystalline melting point °C 53 736 220  
Glass transition temperature °C 53 736 40 5
Heat distortion temperature
Method A
Method B
°C
°C
ISO 75
ISO 75
210
220		  
Properties Unit Test Method DIN ASTM Dry Wet *
Thermal        
Max. Service temperature.
short term
long term
°C
°C		  
180
100

Coefficient of thermal
conductivity		 W/(m . K)   0.28  
Specific heat J/(g . K)   1.5  
Coefficient of thermal expansion 10-5/K   2.5  
Electrical        
Dielectric constant at 105 Hz   53 483    
Dielectric loss factor 105 Hz   53 483    
Specific volume resistance W . cm 53 482    
Surface resistance W 53 482    
Dielectric strength 1 mm kV/mm 53 481    
Tracking resistance   53 480    
Miscellaneous        
Moisture absorption:
Equillibrum in standard atmosphere (23 °C / 50 % relative humidity)		 % 53 714 2.1
Water absorption at saturation at 23 °C % 53 495 6.6
Resistance to hot water,
washing soda		     limited resistance
Flammability   UL 94 HB
Resistance to weathering     resistant

* after storage in a standard 23/50 atmosphere (DIN 50 014) to equilibrium.

Voltar